LZFL-P Multi-Mode Pulsed Fiber-Coupled Laser
LZFL905-70W-105/125
905 nm multi-mode pulsed fiber source, 50 W typ in optical table
The LZFL905-70W-105/125 delivers 905 nm pulses through a 105/125 um multi-mode fiber with 0.22 NA and an SC/PC connector. The optical specification table states 50 W typical pulse output power; the model and file names use 70 W, so the table value is retained here and must be confirmed against the released part drawing before design freeze.
Estimated range
Range estimates apply to pulsed transmitter parts. This device is specified by its own parameters above.
Every parameter on this page is transcribed from the manufacturer datasheet.
905nm-105-70W光纤耦合激光器规格书-TO56V1.0
| Center wavelength | 895 / 905 / 915 nm (min / typ / max) |
|---|---|
| Pulse output power | 50 W typ per optical table |
| Spectral width (FWHM) | <= 5 nm typ |
| Wavelength temperature coefficient | 0.28 nm/C typ |
| Fiber type | Multi-mode |
| Fiber core diameter | 105 um typ |
| Cladding diameter | 125 um typ |
| Numerical aperture | 0.22 typ |
| Fiber length | 20 +/- 3 cm |
| Connector | SC/PC, ceramic ferrule with handle |
| Minimum bend radius | 50 mm |
| Operating voltage | 23 V typ |
| Threshold current | 1 A typ |
| Operating current | 20 A typ |
| Pulse width | 50 ns typ |
| Duty cycle | 0.05% typ |
| Repetition rate | 10 kHz typ |
| Package and pin-out | TO56, 5.6 mm dia. x 22 +/- 3 mm; pin 1 LD(-), pin 2 NC, pin 3 LD(+) |
| Operating case temperature | 15 to +35 C |
| Absolute operating temperature | -40 to +85 C |
| Storage temperature | -20 to +70 C |
| Absolute storage temperature | -40 to +85 C |
| ESD sensitivity | <= 500 V, ESD-sensitive |
| Specification note | Model/file name says 70 W; optical table states 50 W typ. Confirm with the released drawing before design freeze. |
Key features
- 905 nm center wavelength, 895-915 nm range
- 50 W typical pulse output per optical table
- 50 ns typical pulse width
- 10 kHz repetition rate and 0.05% duty cycle
- 105/125 um multi-mode fiber, NA 0.22
- SC/PC connector with ceramic ferrule
- TO56 coaxial package, 5.6 mm diameter
Typical applications
- LiDAR and pulsed ranging modules
- Industrial optical measurement
- Scientific research and integration
Calculate with this datasheet
Each calculator below opens with this part's datasheet numbers already filled in, in the units the fields ask for.
- Q-Switch Laser Design Pulse energy 0.0025 mJ · Pulse energy (µJ) 2.5 μJ · Pulse width 50 ns · Peak power 0.05 kW · Repetition rate 10 kHz · Repetition rate (Hz) 10000 Hz
- Transmitter Pulse Parameters Pulse energy 2.5 μJ · Peak power 50 W · Pulse width 50 ns · Repetition rate 10 kHz · Duty cycle 0.05 %
- Duty Cycle Duty cycle 0.05 % · Pulse width 50 ns · Repetition rate 10 kHz · Repetition rate (Hz) 10000 Hz
- Mode Field Diameter (MFD) Core radius a 52.5 μm · V-number 80.193 · Numerical aperture NA 0.22 · Wavelength 905 nm
Need this part in a specific configuration?
Fibre pigtail, fast-axis collimation, a matched driver board or a filtered receiver - describe the build and we will quote against it.
