LZFL-P Multi-Mode Pulsed Fiber-Coupled Laser

LZFL905-70W-105/125

905 nm、パルス、TO56 coaxial, 5.6 mm

LZFL905-70W-105/125 は 905 nm のファイバ結合レーザーモジュールです。出力はコア径と開口数の規定されたファイバに結合され、コネクター付きで供給されます。自由空間の再調整なしで光ファイバ機器に組み込めます。

50 Wピークパワー
2.5 µJパルスエネルギー
50 nsパルス幅
905 nm波長
Fiber-coupled laser module with a metal housing, pigtail and fiber connector
Fiber-coupled package Package photograph. Single-mode and multimode models share this package view; the selected part determines the continuous or pulsed configuration and ratings.

推定到達距離

到達距離の試算はパルス送信部品に適用されます。このデバイスは上記の固有パラメータで規定されます。

このページのすべてのパラメータはメーカーのデータシートから転記しています。

905nm-105-70W光纤耦合激光器规格书-TO56V1.0

仕様 - LZFL905-70W-105/125
中心波長895 / 905 / 915 nm (min / 標準 / 最大)
Pulse output power50 W 標準 per optical table
スペクトル幅(FWHM)≤ 5 nm 標準
Wavelength temperature coefficient0.28 nm/C 標準
ファイバ種別Multi-mode
ファイバコア径105 µm 標準
Cladding diameter125 µm 標準
開口数0.22 標準
ファイバ長20 ± 3 cm
コネクターSC/PC, ceramic ferrule with handle
Minimum bend radius50 mm
動作電圧23 V 標準
閾値電流1 A 標準
動作電流20 A 標準
パルス幅50 ns 標準
Duty cycle0.05% 標準
繰り返し周波数10 kHz 標準
Package and pin-outTO56, 5.6 mm dia. x 22 ± 3 mm; pin 1 LD(-), pin 2 NC, pin 3 LD(+)
動作ケース温度15~+35 °C
Absolute operating temperature-40~+85 °C
保管温度-20~+70 °C
Absolute storage temperature-40~+85 °C
ESD sensitivity≤ 500 V, ESD-sensitive
Specification noteModel/file name says 70 W; optical table states 50 W 標準. Confirm with the released drawing before design freeze.

主な特長

  • 905 nm center wavelength, 895-915 nm range
  • 50 W 標準 pulse output per optical table
  • 50 ns 標準 pulse width
  • 10 kHz repetition rate and 0.05% duty cycle
  • 105/125 µm マルチモード fiber, NA 0.22
  • SC/PC connector with ceramic ferrule
  • TO56 coaxial package, 5.6 mm diameter

代表的な用途

  • レーザー応用
  • レーザー応用
  • レーザー応用

このデータシートの値で計算

以下の各計算ツールは、この部品のデータシート値が各欄の単位で入力済みの状態で開きます。

  • Q スイッチレーザー設計 Pulse energy 0.0025 mJ · Pulse energy (µJ) 2.5 μJ · Pulse width 50 ns · Peak power 0.05 kW · Repetition rate 10 kHz · Repetition rate (Hz) 10000 Hz
  • 送信パルスパラメータ Pulse energy 2.5 μJ · Peak power 50 W · Pulse width 50 ns · Repetition rate 10 kHz · Duty cycle 0.05 %
  • V 値・モード Normalized frequency V 80.193 · Core radius a 52.5 μm · Numerical aperture NA 0.22 · Operating wavelength λ 905 nm
  • デューティ比 Duty cycle 0.05 % · Pulse width 50 ns · Repetition rate 10 kHz · Repetition rate (Hz) 10000 Hz

この部品を特定の構成で必要とされていますか

ファイバピグテール、高速軸コリメート、整合ドライバ基板、フィルタ付き受光モジュールなど。構成をご記入いただければお見積もりします。

エンジニアに質問