LZFL-P Multi-Mode Pulsed Fiber-Coupled Laser
LZFL1550-30W-105/125-9-SC
1550 nm multi-mode pulsed fiber source, 17 W typ in optical table
The LZFL1550-30W-105/125-9-SC is a 1550 nm pulsed transmitter coupled to a 105/125 um multi-mode fiber with 0.22 NA. The optical specification table gives 15 W minimum and 17 W typical pulse output power; the model and file names use 30 W, so the 17 W table value is retained as the design reference and requires confirmation against the released drawing.
Estimated range
Range estimates apply to pulsed transmitter parts. This device is specified by its own parameters above.
Every parameter on this page is transcribed from the manufacturer datasheet.
1550nm-105-30W光纤耦合激光器规格书-TO9(V2.0)
| Center wavelength | 1540 / 1550 / 1560 nm (min / typ / max) |
|---|---|
| Pulse output power | 15 W min / 17 W typ per optical table |
| Spectral width (FWHM) | <= 10 nm typ |
| Wavelength temperature coefficient | 0.28 nm/C typ |
| Fiber type | Multi-mode |
| Fiber core diameter | 105 um typ |
| Cladding diameter | 125 um typ |
| Numerical aperture | 0.22 typ |
| Fiber length | 20 +/- 3 cm |
| Connector | SC/PC, ceramic ferrule with handle |
| Minimum bend radius | 50 mm |
| Operating voltage | 35 V typ |
| Threshold current | 1 A typ |
| Operating current | 30 A typ |
| Pulse width | 100 ns typ |
| Duty cycle | 0.05% typ |
| Repetition rate | 1 kHz typ |
| Package and pin-out | TO9, 9 mm dia. x 22 +/- 3 mm; pin 1 LD(-), pin 2 NC, pin 3 LD(+) |
| Operating case temperature | 15 to +35 C |
| Absolute operating temperature | -40 to +85 C |
| Storage temperature | -20 to +70 C |
| Absolute storage temperature | -40 to +85 C |
| ESD sensitivity | <= 500 V, ESD-sensitive |
| Specification note | Model/file name says 30 W; optical table states 15 W min / 17 W typ. Confirm with the released drawing before design freeze. |
Key features
- 1550 nm center wavelength, 1540-1560 nm range
- 15 W min / 17 W typ pulse output per optical table
- 100 ns typical pulse width
- 1 kHz repetition rate and 0.05% duty cycle
- 105/125 um multi-mode fiber, NA 0.22
- SC/PC connector with ceramic ferrule
- TO9 coaxial package, 9 mm diameter
Typical applications
- Eye-safe LiDAR and pulsed ranging
- Industrial optical measurement
- Scientific research and integration
Calculate with this datasheet
Each calculator below opens with this part's datasheet numbers already filled in, in the units the fields ask for.
- Q-Switch Laser Design Pulse energy 0.0017 mJ · Pulse energy (µJ) 1.7 μJ · Pulse width 100 ns · Peak power 0.017 kW · Repetition rate 1 kHz · Repetition rate (Hz) 1000 Hz
- Transmitter Pulse Parameters Pulse energy 1.7 μJ · Peak power 17 W · Pulse width 100 ns · Repetition rate 1 kHz · Duty cycle 0.05 %
- Duty Cycle Duty cycle 0.05 % · Pulse width 100 ns · Repetition rate 1 kHz · Repetition rate (Hz) 1000 Hz
- Mode Field Diameter (MFD) Core radius a 52.5 μm · V-number 46.823 · Numerical aperture NA 0.22 · Wavelength 1550 nm
Need this part in a specific configuration?
Fibre pigtail, fast-axis collimation, a matched driver board or a filtered receiver - describe the build and we will quote against it.
