LZPM/LZFL Single-Mode PM Fiber Laser

LZPM-638-80m-4

638 nm, 75 mW typ, polarization-maintaining single-mode fiber

The LZPM-638-80m-4 is a 75 mW typ single-mode polarization-maintaining fiber-coupled laser module at 638 nm. It uses the same coaxial single-mode module structure and follows the corresponding single-mode parameters, with a PM fiber output and an extinction ratio of at least 20 dB. The output is delivered through a 4 um single-mode polarization-maintaining fiber, NA 0.13 and terminated with FC, SMA905, FC/APC.

75 mWOutput power
638 nmWavelength
Fiber-coupled laser module with a metal housing, pigtail and fiber connector
Fiber-coupled package Package photograph. Single-mode and multimode models share this package view; the selected part determines the continuous or pulsed configuration and ratings.

Estimated range

Range estimates apply to pulsed transmitter parts. This device is specified by its own parameters above.

Every parameter on this page is transcribed from the manufacturer datasheet.

LZPM-638-80m-4 PM fiber specification

Specifications - LZPM-638-80m-4
Center wavelength633 - 643 nm (638 nm typ)
Output power, CW70 - 80 mW (75 mW typ)
Spectral width (FWHM)2 nm typ
Wavelength temp. coefficient0.3 nm/K
Fiber typesingle-mode polarization-maintaining (PM)
Fiber core diameter4 um
Numerical aperture0.13
Fiber length100 cm (110 cm max)
Extinction ratio>= 20 dB
ConnectorFC, SMA905, FC/APC
Operating voltage2.8 V typ / 3.0 V max
Threshold current80 mA typ / 90 mA max
Operating current215 mA typ
PackageCoaxial TO-Can
Operating temperature-20 to +60 C
Storage temperature-40 to +85 C

Key features

  • Center wavelength 638 nm
  • Continuous output 75 mW typ
  • 4 um single-mode polarization-maintaining fiber, NA 0.13
  • Extinction ratio >= 20 dB
  • Connector: FC, SMA905, FC/APC
  • Coaxial TO package with integrated coupling optics

Typical applications

  • Medical instruments
  • Printing
  • Precision alignment

Calculate with this datasheet

Each calculator below opens with this part's datasheet numbers already filled in, in the units the fields ask for.

Need this part in a specific configuration?

Fibre pigtail, fast-axis collimation, a matched driver board or a filtered receiver - describe the build and we will quote against it.

Ask an engineer