Visible / RGB Collimated Laser Head

LZRGB-520-Collimated

520 nm green, CW 1 - 1.5 W per emitter / 13.5 W bank

520 nm green collimated laser head, supplied either as a single emitter or as a multi-emitter bank with integrated collimation. The bank option trades a small amount of divergence for a large amount of power, which is what makes it usable in projection and high-brightness illumination.

1.5 WAusgangsleistung
520 nmWellenlänge

Geschätzte Reichweite

Reichweitenschätzungen gelten für gepulste Sender. Dieses Bauteil ist durch seine eigenen Parameter oben spezifiziert.

Jeder Parameter auf dieser Seite ist aus dem Herstellerdatenblatt übernommen.

520 nm green laser diode multi-source summary specification V5.0

Spezifikationen - LZRGB-520-Collimated
Form520 nm green laser diode, multi transverse mode, TO-CAN / TO90 / LD bank with collimating lens
Wavelength range510 - 532 nm
Rated outputCW 1 - 1.5 W per emitter / 13.5 W bank
Operating modeCW
PackageTO9 / TO90 / LD bank
BeamCollimated; square or line spot after shaping
Operating case temperature0 to +60
Qualified sources3 - Sharp, HiLaser, Nichia
Spread across sourcesPeak wavelength 510 - 532 nm across sources; threshold 0.10 - 0.32 A; operating current 1.4 - 2.0 A at the rated output.
LifetimeMTTF > 2000 h at Tc = 60 °C and Iop = 1.8 A (GH05C01B9G); 10000 h typical, 20000 h reference, at 50 % for the HiLaser and Nichia parts.

Wesentliche Merkmale

  • CW 1 W to 1.5 W from a single emitter; the Nichia bank reaches 13.5 W from 8+ emitters at 1.65 W each
  • Threshold current 0.10 - 0.32 A, operating current 1.4 - 2.3 A depending on the source
  • Operating voltage 4.8 - 6.5 V, the highest of the three colours, so the driver has to be a step-up rather than a linear pass
  • Collimated bank output is specified at 0.2 - 0.6° parallel and ±1.0° perpendicular, with pointing deviation <= 0.7°
  • Multi transverse mode, so the raw beam is not Gaussian and cannot be corrected to a diffraction-limited spot

Dieses Teil steckt in diesen Anwendungs-Zerlegungen:

Typische Anwendungen

  • Laser projector / display
  • Light source for optical equipment

Qualifizierte Alternativquellen

  • GH05C01B9G
    Sharp
    CW 1 W (max 1.2 W)
    TO9
  • HiLaserGTV100A
    HiLaser
    CW 1.5 W typical (Iop = 2 A)
    TO90
  • NUGM06
    Nichia
    Bank 13.5 W typical (1.65 W per LD)
    LD bank with collimation

Mit diesem Datenblatt rechnen

Jeder Rechner unten öffnet sich mit den Zahlen dieses Bauteils bereits eingetragen - Pulsenergie, Spitzenleistung, Wellenlänge, Pulsbreite, Tastverhältnis und Wiederholrate, in den Einheiten, die die Felder verlangen.

Quellenparameter

Ein Kopf, mehrere qualifizierte Quellen. Jede Zahl stammt aus dem jeweiligen Datenblatt und ist als min. / typ. / max. geschrieben; ein Strich bedeutet, dass das Blatt keinen Wert nennt.

GH05C01B9GHiLaserGTV100ANUGM06
Rated outputCW 1 W (max 1.2 W)CW 1.5 W typicalBank 13.5 W typical (1.65 W per LD)
Absolute maximum output Po1.2 W (CW)1.5 W (CW)1.65 W (CW, per LD)
Operating case temperature Tc0 ~ +60 ℃0 ~ +60 ℃0 ~ +65 C (LD board)
Storage temperature Tstg-40 ~ +85 ℃-40 ~ +85 ℃-40 ~ +85 ℃
Soldering temperature Tsol350 C (<= 3 s, 1.6 mm)260 C (<= 10 s, >= 2 mm)260 C (<= 10 s, >= 2 mm)
Reverse voltage / current2 V85 mA85 mA
Threshold current Ith- / 0.18 / 0.30 A- / 0.32 / 0.45 A0.10 / - / 0.38 A (per LD)
Operating current Iop- / 1.4 / 1.79 A- / 2.0 / 2.3 A1.9 A rated, 2.3 A max (per LD)
Operating voltage Vop / Vf- / 5.4 / 6.5 V- / 4.8 / 5.3 V4.0 / (4.4) / 5.5 V (per LD)
Slope efficiency η0.45 / 0.8 / - W/A—- / (1.0) / - W/A (per LD)
Peak wavelength λp510 / 520 / 530 nm515 / 520 / 532 nm518 / (525) / 532 nm (per LD)
Divergence θ∥ (parallel)5 / 9 / 20°- / 10 / 15°0.2 / (0.4) / 0.6° (collimated)
Divergence θ⊥ (perpendicular)35 / 44 / 55°- / 46 / 50°-1.0 / (0) / 1.0° (collimated)
Square spot divergence θ⊥5 / 9 / 20°- / 10 / 15°5 / 9 / 20°
Line spot divergence θ⊥0.8 / 0.9 / 1°0.8 / 0.9 / 1°0.8 / 0.9 / 1°
Pointing deviation Δθ±5 / ±5°—<= 0.7° (bank)
Lifetime / MTTFMTTF > 2000 h (Tc = 60 C, Iop = 1.8 A)10000 h typical (20000 h reference) at 50 %; 1000 h at 1 %10000 h (20000 h) at 50 %; 1000 h at 1 %

Brauchen Sie dieses Bauteil in einer bestimmten Ausführung?

Faserpigtail, Schnellachsenkollimation, eine passende Treiberplatine oder ein gefilterter Empfänger - beschreiben Sie den Aufbau, und wir bieten darauf an.

Einen Ingenieur fragen