Visible / RGB Collimated Laser Head

LZRGB-520-Collimated

520 nm green, CW 1 - 1.5 W per emitter / 13.5 W bank

520 nm green collimated laser head, supplied either as a single emitter or as a multi-emitter bank with integrated collimation. The bank option trades a small amount of divergence for a large amount of power, which is what makes it usable in projection and high-brightness illumination.

1.5 WÇıkış gücü
520 nmDalga boyu

Tahmini menzil

Menzil tahminleri darbeli verici parçalar için geçerlidir. Bu cihaz yukarıdaki kendi parametreleriyle tanımlanır.

Bu sayfadaki her parametre üreticinin veri sayfasından aktarılmıştır.

520 nm green laser diode multi-source summary specification V5.0

Şartnameler - LZRGB-520-Collimated
Form520 nm green laser diode, multi transverse mode, TO-CAN / TO90 / LD bank with collimating lens
Wavelength range510 - 532 nm
Rated outputCW 1 - 1.5 W per emitter / 13.5 W bank
Operating modeCW
PackageTO9 / TO90 / LD bank
BeamCollimated; square or line spot after shaping
Operating case temperature0 to +60
Qualified sources3 - Sharp, HiLaser, Nichia
Spread across sourcesPeak wavelength 510 - 532 nm across sources; threshold 0.10 - 0.32 A; operating current 1.4 - 2.0 A at the rated output.
LifetimeMTTF > 2000 h at Tc = 60 °C and Iop = 1.8 A (GH05C01B9G); 10000 h typical, 20000 h reference, at 50 % for the HiLaser and Nichia parts.

Öne çıkan özellikler

  • CW 1 W to 1.5 W from a single emitter; the Nichia bank reaches 13.5 W from 8+ emitters at 1.65 W each
  • Threshold current 0.10 - 0.32 A, operating current 1.4 - 2.3 A depending on the source
  • Operating voltage 4.8 - 6.5 V, the highest of the three colours, so the driver has to be a step-up rather than a linear pass
  • Collimated bank output is specified at 0.2 - 0.6° parallel and ±1.0° perpendicular, with pointing deviation <= 0.7°
  • Multi transverse mode, so the raw beam is not Gaussian and cannot be corrected to a diffraction-limited spot

Bu parça şu uygulama sökümlerinde kullanılır:

Tipik uygulamalar

  • Laser projector / display
  • Light source for optical equipment

Yetkin alternatif kaynaklar

  • GH05C01B9G
    Sharp
    CW 1 W (max 1.2 W)
    TO9
  • HiLaserGTV100A
    HiLaser
    CW 1.5 W typical (Iop = 2 A)
    TO90
  • NUGM06
    Nichia
    Bank 13.5 W typical (1.65 W per LD)
    LD bank with collimation

Bu veri sayfasıyla hesaplayın

Aşağıdaki her hesaplayıcı bu parçanın kendi değerleri önceden doldurulmuş olarak açılır - darbe enerjisi, tepe güç, dalga boyu, darbe genişliği, görev çevrimi ve tekrar hızı, alanların istediği birimlerde.

Kaynak parametreleri

Tek kafa, birden çok yetkin kaynak. Aşağıdaki her değer ilgili kaynağın kendi özet sayfasından alınmıştır ve min / tip / maks olarak yazılmıştır; tire, sayfada değer belirtilmediği anlamına gelir.

GH05C01B9GHiLaserGTV100ANUGM06
Rated outputCW 1 W (max 1.2 W)CW 1.5 W typicalBank 13.5 W typical (1.65 W per LD)
Absolute maximum output Po1.2 W (CW)1.5 W (CW)1.65 W (CW, per LD)
Operating case temperature Tc0 ~ +60 ℃0 ~ +60 ℃0 ~ +65 C (LD board)
Storage temperature Tstg-40 ~ +85 ℃-40 ~ +85 ℃-40 ~ +85 ℃
Soldering temperature Tsol350 C (<= 3 s, 1.6 mm)260 C (<= 10 s, >= 2 mm)260 C (<= 10 s, >= 2 mm)
Reverse voltage / current2 V85 mA85 mA
Threshold current Ith- / 0.18 / 0.30 A- / 0.32 / 0.45 A0.10 / - / 0.38 A (per LD)
Operating current Iop- / 1.4 / 1.79 A- / 2.0 / 2.3 A1.9 A rated, 2.3 A max (per LD)
Operating voltage Vop / Vf- / 5.4 / 6.5 V- / 4.8 / 5.3 V4.0 / (4.4) / 5.5 V (per LD)
Slope efficiency η0.45 / 0.8 / - W/A—- / (1.0) / - W/A (per LD)
Peak wavelength λp510 / 520 / 530 nm515 / 520 / 532 nm518 / (525) / 532 nm (per LD)
Divergence θ∥ (parallel)5 / 9 / 20°- / 10 / 15°0.2 / (0.4) / 0.6° (collimated)
Divergence θ⊥ (perpendicular)35 / 44 / 55°- / 46 / 50°-1.0 / (0) / 1.0° (collimated)
Square spot divergence θ⊥5 / 9 / 20°- / 10 / 15°5 / 9 / 20°
Line spot divergence θ⊥0.8 / 0.9 / 1°0.8 / 0.9 / 1°0.8 / 0.9 / 1°
Pointing deviation Δθ±5 / ±5°—<= 0.7° (bank)
Lifetime / MTTFMTTF > 2000 h (Tc = 60 C, Iop = 1.8 A)10000 h typical (20000 h reference) at 50 %; 1000 h at 1 %10000 h (20000 h) at 50 %; 1000 h at 1 %

Bu parça özel bir konfigürasyonda mı gerekiyor?

Fiber pigtail, hızlı eksen kolimasyonu, uyumlu sürücü kartı veya filtreli alıcı - yapıyı anlatın, ona göre fiyat verelim.

Bir mühendise sorun