Visible / RGB Collimated Laser Head

LZRGB-638-Collimated

638 nm red, CW 500 mW - 1 W

638 nm red collimated laser head for laser projection, display engines, sensing and barcode illumination. Three independent sources are qualified against the same head, so the beam-shaping optics and the drive design can be fixed before the emitter is chosen.

700 mW출력
638 nm파장
TO56 laser diode, three-quarter view: gold-plated header, silver cap with a round emission window, and three leads
TO56 package 패키지 사진입니다. 패키지는 이 계열에서 공통이며, 다이와 코팅, 정격은 모델마다 다릅니다.

예상 거리

거리 추정은 펄스 송신 부품에 적용됩니다. 이 소자는 위의 자체 파라미터로 규정됩니다.

이 페이지의 모든 파라미터는 제조사 데이터시트에서 옮겨 적은 것입니다.

638 nm red laser diode multi-source summary specification V5.0

사양 - LZRGB-638-Collimated
Form638 nm red laser diode, TO56 TO-CAN, collimated
Wavelength range632 - 644 nm
Rated outputCW 500 mW - 1 W
Operating modeCW
PackageTO56
BeamCollimated; square or line spot after shaping
Operating case temperature-10 to +40
Qualified sources3 - Sharp, Mitsubishi Electric, HiLaser
Spread across sourcesPeak wavelength 632 - 644 nm across sources; threshold 90 - 180 mA; operating current 660 - 1200 mA at the rated output.
LifetimeMTTF > 2000 h at Tc = 40 °C, Po = 490 mW down to 50 % of initial power (GH0637AA2G); 8000 h typical, 10000 h reference, at 50 % cumulative failure (HiLaserRTV101A).

주요 특징

  • CW 500 mW to 1 W at 638 nm; the Mitsubishi part additionally carries a 1.0 W pulsed rating at duty <= 33 % and f <= 50 Hz
  • Threshold current 90 - 180 mA; operating current 660 - 1000 mA at the rated optical output
  • Fast axis 25 - 45° and slow axis 1 - 26° before shaping, so the collimator has to be matched to the source, not to the wavelength
  • Square and line spot options after shaping, both specified at 0.8 - 1°
  • TO56 TO-CAN outline, soldering at 260 - 350 °C, storage to +85 °C

이 부품은 다음 용도 분해 분석에 사용됩니다:

대표적 용도

  • Laser projector / display
  • Light source for optical equipment, sensors and barcode readers

인증 대안 공급처

  • GH0637AA2G
    Sharp
    CW 700 mW (Tc <= 30 C); CW 500 mW (30 - 40 C)
    TO56
  • ML501P73
    Mitsubishi Electric
    CW 500 mW; pulsed 1.0 W (duty <= 33 %, f <= 50 Hz)
    TO56
  • HiLaserRTV101A
    HiLaser
    1 W (absolute maximum 1.15 W)
    TO56

이 데이터시트 값으로 계산

아래 계산기는 이 부품의 수치(펄스 에너지, 피크 출력, 파장, 펄스 폭, 듀티 사이클, 반복 주파수)가 각 입력란이 요구하는 단위로 이미 채워진 상태로 열립니다.

공급처 파라미터

하나의 헤드에 여러 인증 공급처가 있습니다. 아래 모든 수치는 해당 공급처의 요약 시트에서 옮겨 적었으며 min / typ / max로 표기합니다. 대시는 시트에 수치가 없음을 뜻합니다.

GH0637AA2GML501P73HiLaserRTV101A
Rated outputCW 700 mW (Tc <= 30 C) / 500 mW (30 - 40 C)CW 500 mW / pulsed 1.0 W1 W
Absolute maximum output Po700 mW500 mW CW / 1.0 W pulsed1150 mW
Operating case temperature Tc-10 ~ +40 ℃-5 ~ +40 ℃-10 ~ +40 ℃
Storage temperature Tstg-40 ~ +85 ℃-40 ~ +100 ℃-40 ~ +85 ℃
Soldering temperature Tsol350 C (<= 3 s, 1.6 mm from the base)260 C (<= 10 s, leads >= 2 mm)260 C (<= 10 s, leads >= 2 mm)
Reverse voltage / current2 V2 V2 V
Threshold current Ith- / 110 / 155 mA90 / 170 / 210 mA- / 180 / 300 mA
Operating current Iop- / 810 / 930 mA (Po = 700 mW)500 / 660 / 800 mA (Po = 500 mW)- / 900 / 1000 mA (P = 1 W, Tc = 25 C); - / 1100 / 1200 mA (P = 1 W, Tc = 40 C)
Operating voltage Vop / Vf- / 2.46 / 3.0 V1.9 / 2.2 / 2.6 V- / 2.2 / 3.0 V
Slope efficiency η—0.8 / 1.0 / 1.4 mW/mA—
Peak wavelength λp635 / 638 / 642 nm632 / 638 / 644 nm634 / 638 / 644 nm
Divergence θ∥ (parallel)6 / 16 / 26°1 / 7.5 / 15°- / 10 / 20° (1/e2, P = 1 W)
Divergence θ⊥ (perpendicular)25 / 35 / 45°25 / 35 / 45°- / 60 / 70° (1/e2, P = 1 W)
Square spot divergence θ⊥6 / 16 / 26°1 / 7.5 / 15°- / 10 / 20°
Line spot divergence θ⊥0.8 / 0.9 / 1°0.8 / 0.9 / 1°0.8 / 0.9 / 1°
Pointing deviation Δθ±5 / ±5°——
Lifetime / MTTFMTTF > 2000 h (Tc = 40 C, Po = 490 mW, to 50 % of initial power)See the vendor reliability report8000 h typical (10000 h reference) at 50 % cumulative failure; 1000 h at 1 %

이 부품을 특정 구성으로 필요로 하십니까?

광섬유 피그테일, 고속축 시준, 전용 드라이버 보드, 필터 수신기 등 구성이 정해지면 설명해 주십시오. 그에 맞춰 견적을 드립니다.

엔지니어에게 질문