Visible / RGB Collimated Laser Head

LZRGB-638-Collimated

638 nm red, CW 500 mW - 1 W

638 nm red collimated laser head for laser projection, display engines, sensing and barcode illumination. Three independent sources are qualified against the same head, so the beam-shaping optics and the drive design can be fixed before the emitter is chosen.

700 mWPuissance de sortie
638 nmLongueur d'onde
TO56 laser diode, three-quarter view: gold-plated header, silver cap with a round emission window, and three leads
TO56 package Photographie du boîtier. Le boîtier est commun à toute la famille ; la puce, son traitement et les caractéristiques varient selon le modèle.

Portée estimée

Les estimations de portée concernent les émetteurs pulsés. Ce composant est spécifié par ses propres paramètres ci-dessus.

Tous les paramètres de cette page sont recopiés de la fiche technique du fabricant.

638 nm red laser diode multi-source summary specification V5.0

Spécifications - LZRGB-638-Collimated
Form638 nm red laser diode, TO56 TO-CAN, collimated
Wavelength range632 - 644 nm
Rated outputCW 500 mW - 1 W
Operating modeCW
PackageTO56
BeamCollimated; square or line spot after shaping
Operating case temperature-10 to +40
Qualified sources3 - Sharp, Mitsubishi Electric, HiLaser
Spread across sourcesPeak wavelength 632 - 644 nm across sources; threshold 90 - 180 mA; operating current 660 - 1200 mA at the rated output.
LifetimeMTTF > 2000 h at Tc = 40 °C, Po = 490 mW down to 50 % of initial power (GH0637AA2G); 8000 h typical, 10000 h reference, at 50 % cumulative failure (HiLaserRTV101A).

Caractéristiques clés

  • CW 500 mW to 1 W at 638 nm; the Mitsubishi part additionally carries a 1.0 W pulsed rating at duty <= 33 % and f <= 50 Hz
  • Threshold current 90 - 180 mA; operating current 660 - 1000 mA at the rated optical output
  • Fast axis 25 - 45° and slow axis 1 - 26° before shaping, so the collimator has to be matched to the source, not to the wavelength
  • Square and line spot options after shaping, both specified at 0.8 - 1°
  • TO56 TO-CAN outline, soldering at 260 - 350 °C, storage to +85 °C

Cette pièce est utilisée dans ces démontages d'application :

Applications typiques

  • Laser projector / display
  • Light source for optical equipment, sensors and barcode readers

Sources alternatives qualifiées

  • GH0637AA2G
    Sharp
    CW 700 mW (Tc <= 30 C); CW 500 mW (30 - 40 C)
    TO56
  • ML501P73
    Mitsubishi Electric
    CW 500 mW; pulsed 1.0 W (duty <= 33 %, f <= 50 Hz)
    TO56
  • HiLaserRTV101A
    HiLaser
    1 W (absolute maximum 1.15 W)
    TO56

Calculer avec cette fiche technique

Chaque calculateur ci-dessous s'ouvre avec les valeurs de cette pièce déjà saisies : énergie par impulsion, puissance crête, longueur d'onde, largeur d'impulsion, rapport cyclique et fréquence de répétition, dans les unités demandées par les champs.

Paramètres de la source

Une même tête, plusieurs sources qualifiées. Chaque valeur provient de la fiche récapitulative de cette source, écrite en min. / typ. / max. ; un tiret signifie que la fiche ne donne aucun chiffre.

GH0637AA2GML501P73HiLaserRTV101A
Rated outputCW 700 mW (Tc <= 30 C) / 500 mW (30 - 40 C)CW 500 mW / pulsed 1.0 W1 W
Absolute maximum output Po700 mW500 mW CW / 1.0 W pulsed1150 mW
Operating case temperature Tc-10 ~ +40 ℃-5 ~ +40 ℃-10 ~ +40 ℃
Storage temperature Tstg-40 ~ +85 ℃-40 ~ +100 ℃-40 ~ +85 ℃
Soldering temperature Tsol350 C (<= 3 s, 1.6 mm from the base)260 C (<= 10 s, leads >= 2 mm)260 C (<= 10 s, leads >= 2 mm)
Reverse voltage / current2 V2 V2 V
Threshold current Ith- / 110 / 155 mA90 / 170 / 210 mA- / 180 / 300 mA
Operating current Iop- / 810 / 930 mA (Po = 700 mW)500 / 660 / 800 mA (Po = 500 mW)- / 900 / 1000 mA (P = 1 W, Tc = 25 C); - / 1100 / 1200 mA (P = 1 W, Tc = 40 C)
Operating voltage Vop / Vf- / 2.46 / 3.0 V1.9 / 2.2 / 2.6 V- / 2.2 / 3.0 V
Slope efficiency η—0.8 / 1.0 / 1.4 mW/mA—
Peak wavelength λp635 / 638 / 642 nm632 / 638 / 644 nm634 / 638 / 644 nm
Divergence θ∥ (parallel)6 / 16 / 26°1 / 7.5 / 15°- / 10 / 20° (1/e2, P = 1 W)
Divergence θ⊥ (perpendicular)25 / 35 / 45°25 / 35 / 45°- / 60 / 70° (1/e2, P = 1 W)
Square spot divergence θ⊥6 / 16 / 26°1 / 7.5 / 15°- / 10 / 20°
Line spot divergence θ⊥0.8 / 0.9 / 1°0.8 / 0.9 / 1°0.8 / 0.9 / 1°
Pointing deviation Δθ±5 / ±5°——
Lifetime / MTTFMTTF > 2000 h (Tc = 40 C, Po = 490 mW, to 50 % of initial power)See the vendor reliability report8000 h typical (10000 h reference) at 50 % cumulative failure; 1000 h at 1 %

Besoin de cette pièce dans une configuration précise ?

Fibre pigtail, collimation en axe rapide, carte de pilotage adaptée ou récepteur filtré : décrivez le montage et nous chiffrerons dessus.

Poser une question à un ingénieur