Golf rangefinder teardown

Anatomy of a golf laser rangefinder

A golf rangefinder is the four subsystems the other ranging products carry - the emitter, the detector, the optics between them and the electronics that time the round trip - plus a fifth one they do not have: the tilt sensor and the display that turn a distance into a number the player can hit. Pick a part from the bill of materials and drop it on the unit; every parameter comes with the catalogue parts that carry it.

Cómo usar esta página
  1. 1Elige una pieza de la lista de materiales.
  2. 2Suéltala sobre el módulo o simplemente haz clic en la tarjeta.
  3. 3Lee su función, sus parámetros y las referencias que los cumplen.

Lista de materiales

Cada pieza, un solo presupuesto óptico. Arrastra una tarjeta sobre la foto o haz clic en ella: el panel de al lado se rellena con los parámetros de esa pieza.

A handheld golf laser rangefinder, three-quarter view: two apertures at the front left, the ocular at the right, a control ridge along the top

Arrastra una pieza aquí o haz clic en una tarjeta de la lista de materiales

A handheld golf rangefinder, three-quarter view. The two apertures at the front left are the transmit and receive windows, the ocular is at the right, and the control ridge runs along the top.

Las posiciones de los componentes son un esquema didáctico, no un plano de montaje: la colocación y la vista despiezada son orientativas. Los valores de los parámetros son los de la especificación enlazada.

Todas las piezas, parámetro a parámetro

Las mismas cifras que muestra la vista interactiva, en tablas que puedes leer, buscar y citar.

905 nm laser diode Transmitter

Emits the ranging pulse. On a golf unit peak power, pulse width and divergence are chosen for a few hundred metres and for thousands of measurements on one battery, so the compact end of the family is where the design starts - not the highest peak power on the list.

905 nm laser diode - Laser Diode | edge emitter
Peak wavelength 905 nm (895 - 915 nm)
Peak output power 15 - 600 W
Pulse energy @ 100 ns 1.5 - 30 uJ
Beam divergence, FWHM 9 x 25 deg bare | 9 x 6 deg FAC
Pulse width 1 - 100 ns (max 100 ns)
Duty cycle, max 0.1 %
Repetition rate up to 10 kHz
Package TO56 | bare die | VCSEL array
Est. range, retro-reflective (40 W) 755 m
Est. range, diffuse target (40 W) 250 m

Avalanche photodiode Receiver

Sets how weak a return the product can still trust. On a short-range unit the small-area packages are the right choice: less dark current and less capacitance than a large area, which is what keeps the timing edge sharp.

Avalanche photodiode - Avalanche photodiode | receive channel
Response spectrum 400 - 1100 nm
Wavelength 905 nm
Active area 230 um TO-46 | 500 um LCC ceramic
Responsivity 80 A/W @ M=100
Response time 0.5 ns
Dark current 0.4 nA @ M=100
Total capacitance 1.0 pF @ M=100
Optimum gain 100
Reverse breakdown voltage 100 - 200 V
Optical filter 905 nm spike filter
Package TO-46 | LCC1 / LCC2 ceramic

Emit / receive optics Optical path

Splits the light: the transmit aperture has to get the pulse out inside the receive aperture's field of view, and the receive aperture has to collect enough of the return without also collecting the transmitter's own glare.

Emit / receive optics - Ocular, apertures and ranging path
Optical channels 2 ranging (transmit + receive) + observation path
Windows on the front face 2
Transmit beam, bare 25 deg
Transmit beam, FAC 6 deg
Receive aperture / focal length Set by your optical design Lo fija tu diseño
Transmission To be confirmed against the drawing and a test band Lo fija tu diseño
Receive filtering 905 nm spike filter at the detector

Drive and timing Electronics

Turns a stored capacitor into a nanosecond current pulse and turns the detector's edge back into a number. On a golf unit it also has to hold calibration across temperature, because the whole product is judged on repeatability.

Drive and timing - Driver and ToF timing
Peak pulse current 70 A
Pulse width 50 ns - 1 us adjustable
Repetition rate 1 kHz - 30 kHz adjustable
Rise time 7.5 ns typical
Fall time 12 ns typical
Supply voltage 12 V DC
Laser drive voltage 1 - 50 V DC
Control interface Internal trigger / external TTL
Factory default 100 ns @ 3 kHz, internal trigger
Detector bias 100 - 200 V reverse, temperature compensated Lo fija tu diseño

Tilt and display Interface

Adds the two things a plain rangefinder does not have - an angle, and a readable number. Which of the straight-line distance, the angle and a compensated distance the unit shows is a product decision, and a regulated one in some competitions.

Tilt and display - Slope compensation and readout
Tilt measurement range To be confirmed: product specification Lo fija tu diseño
Angle accuracy / resolution To be confirmed: specification and calibration conditions Lo fija tu diseño
Slope compensation To be confirmed: whether this model supports it and how it is switched Lo fija tu diseño
Display type / readout To be confirmed: LCD, OLED or a projected reticle Lo fija tu diseño
Buttons and modes To be confirmed: product definition Lo fija tu diseño
Indicator channel Optional visible laser - see the parts below

Todos los valores de esta página salen del registro de catálogo que genera la ficha del producto enlazado, así que no pueden contradecirse.

Piezas detrás de estos parámetros

Cada cifra de abajo se lee del mismo registro de catálogo que genera la ficha de producto. Aquí no hay nada reescrito a mano.

This unit is the 905 nm / pulsed / short-range scenario

Run the selector with application = rangefinder, wavelength = 905 nm and output = pulsed, then keep the peak power low: a flag is a cooperative target a few hundred metres away, so the transmit chain below is taken from the compact end of the family. The catalogue carries the same four subsystems up to 1.6 km and 2.1 km if the product has to grow, and an eye-safe 1535 nm chain if it has to.

Tell us the range, the target and the size limit

A golf rangefinder is the tightest package in the ranging family: one battery, a few hundred metres and a number on a screen. Send us the range you need and the space you have, and we come back with the transmit chain, the receiver and the optics between them.

Pregunta a un ingeniero