Avalanche Photodiode

LCC1-905APD-500-0.5

905 nm APD, 500 um active area

LCC1 APD with a 0.9 V/C breakdown temperature coefficient, immune to strong ambient daylight; a good fit for outdoor ranging.

905 nm波長
Ceramic LCC avalanche photodiode shown both ways up: the chip under its window on one face, four gold pads on the other
Ceramic LCC package パッケージの写真です。パッケージはこのシリーズ共通で、チップ・コーティング・定格は型番ごとに異なります。

推定到達距離

到達距離の試算はパルス送信部品に適用されます。このデバイスは上記の固有パラメータで規定されます。

このページのすべてのパラメータはメーカーのデータシートから転記しています。

LCC1-905APD-500-0.5 specification

仕様 - LCC1-905APD-500-0.5
Response spectrum400 - 1100 nm
Wavelength905 nm
Active diameter500 um
Responsivity80 A/W @ M=100
Response time0.5 ns
Dark current0.4 nA @ M=100
Total capacitance1.0 pF @ M=100
Optimum gain100
Reverse breakdown voltage100 - 200 V
Voltage temp. coefficient0.9 V/C
Optical filter905 nm spike filter, strong-ambient-light version
PackageLCC1 ceramic
Operating temperature-40 to +85 C
Storage temperature-55 to +125 C

主な特長

  • Responsivity 80 A/W @ M=100
  • Response time 0.5 ns
  • Active diameter 500 um
  • Optimum gain M = 100
  • Breakdown voltage 100 - 200 V
  • Temperature coefficient 0.9 V/C
  • 905 nm spike filter, strong-ambient-light version

この部品は以下の用途分解で使われています:

代表的な用途

  • Laser rangefinder receivers
  • LiDAR receive channels
  • Optical time-of-flight measurement
  • Low-light optical detection

このデータシートの値で計算

以下の各計算ツールは、この部品の数値(パルスエネルギー、ピークパワー、波長、パルス幅、デューティ比、繰り返し周波数)を各欄が求める単位で入力済みの状態で開きます。

この部品を特定の構成で必要とされていますか

ファイバピグテール、高速軸コリメート、整合ドライバ基板、フィルタ付き受光モジュールなど。構成をご記入いただければお見積もりします。

エンジニアに質問