905 nm application teardown
Anatomy of a 905 nm laser rangefinder
A rangefinder is four parts and one optical budget. Pick a part from the bill of materials, drop it on the module, and read the parameters that decide whether the design reaches 10 m or 2 km - each one with the catalogue parts that carry it.
- 1اختر قطعة من قائمة المواد.
- 2أفلتها على الوحدة، أو انقر البطاقة فقط.
- 3اقرأ وظيفتها ومعلماتها وأرقام القطع وراءها.
قائمة المواد
كل قطعة، وميزانية بصرية واحدة. اسحب بطاقة على الصورة، أو انقر عليها - وتمتلئ اللوحة المجاورة بمعلمات تلك القطعة.
اسحب قطعة إلى هنا أو انقر بطاقة في قائمة المواد
Front face, two optical windows: transmit on the left, receive on the right. Driver board on top.
مواضع المكوِّنات مخطط تعليمي لا رسم تجميع: المواضع والعرض المفكَّك إرشادية. وقيم المعلمات هي قيم المواصفة المرتبطة.
كل قطعة، معلمة بمعلمة
الأرقام نفسها التي يعرضها العرض التفاعلي، في جداول يمكنك قراءتها والبحث فيها واقتباسها.
905 nm laser diode Transmitter
Emits the ranging pulse. Peak power, pulse width, divergence and emission timing together decide how far the system reaches and how much power it burns.
| Peak wavelength | 905 nm (895 - 915 nm) |
|---|---|
| Peak output power | 40 - 600 W |
| Pulse energy @ 100 ns | 4 - 30 uJ |
| Number of emitters | 3 - 9 stacked |
| Aperture size (w x h) | 110 x 30 um |
| Beam divergence, FWHM | 9 x 25 deg bare | 9 x 6 deg FAC |
| Pulse width | 1 - 100 ns (max 100 ns) |
| Duty cycle, max | 0.1 % |
| Repetition rate | up to 10 kHz |
| Operating current | 12 - 55 A |
| Operating voltage | 12.6 - 80 V |
| Package | TO56 | metal stack | bare die |
Avalanche photodiode Receiver
Sets how faint an echo the system can still see. Sensitivity only means something together with responsivity, gain, dark current, bandwidth, bias stability and the receive aperture.
| Response spectrum | 400 - 1100 nm |
|---|---|
| Wavelength | 905 nm |
| Active diameter | 230 um | 500 um | 16 elements |
| Responsivity | 80 A/W @ M=100 |
| Response time | 0.5 ns |
| Dark current | 0.4 nA @ M=100 |
| Total capacitance | 1.0 pF @ M=100 |
| Optimum gain | 100 |
| Reverse breakdown voltage | 100 - 200 V |
| Voltage temp. coefficient | 1.1 - 1.4 V/C |
| Optical filter | 905 nm spike filter |
| Package | TO-46 | LCC1 / LCC2 ceramic | linear array |
Optics Optical path
Transmit optics set the spot size, the divergence and the eye-safety geometry. Receive optics set how much of the echo ever reaches the APD.
| Optical channels | 2 (transmit + receive) |
|---|---|
| Transmit beam, bare emitter | 9 x 25 deg FWHM |
| Transmit beam, FAC | 9 x 6 deg FWHM |
| Aperture size (w x h) | 110 x 30 um |
| Receive aperture / focal length | Set by your module design يحدده تصميمك |
| Receive filter | 905 nm spike filter at the detector |
| Windows on the front face | 2 |
Drive and timing electronics Electronics
Sets the pulse shape - width, rise time, jitter - and the receive bandwidth. Both feed straight into distance resolution and into the smallest pulse you can use.
| Peak pulse current | 70 A |
|---|---|
| Pulse width | 50 ns - 1 us adjustable |
| Repetition rate | 1 kHz - 30 kHz adjustable |
| Rise time | 7.5 ns typical |
| Fall time | 12 ns typical |
| Supply voltage | 12 V DC |
| Laser drive voltage | 1 - 50 V DC |
| Control interface | Internal trigger / external TTL |
| Factory default | 100 ns @ 3 kHz, internal trigger |
كل قيمة معلمة في هذه الصفحة مسحوبة من سجل الكتالوج الذي ينتج صفحة المنتج المرتبطة، فلا يمكن أن تختلفا.
القطع وراء هذه المعلمات
كل رقم أدناه مقروء من سجل الكتالوج نفسه الذي ينتج صفحة المنتج. لا شيء في هذه الصفحة مكتوب يدويًا.
Transmit chain
Pulsed 905 nm sources from 40 W to 600 W, in TO56, metal stack and collimated packages.
Receive chain
Silicon APDs at 905 nm: two active areas, two package families, plus a 16-element array.
Drive and timing
A 70 A nanosecond driver board that already has the timing generator on it, so the first prototype does not need a custom board.
This module is the 905 nm / pulsed / rangefinder scenario
Run the selector with application = rangefinder, wavelength = 905 nm and output = pulsed and it returns the transmit chain listed below. The teardown shows what those parts become once they are assembled, aligned and driven.
The receive side is the hard half
Send us the target, the range and the size limit. We come back with a transmit chain, a detector and the loss budget between them.
